Ion Type Smoke Detector SS-668

ion type smoke detection;suitable for installing in the places of less-smoking and no-smoking;

TECHNICAL PARAMETERS:     

POWER SUPPLY: 12—36VDC; 37—60VDC (Customizable)      WORK CURRENT: less than 10 mAOUTPUT FORM: default setting of output open in alert condition, output short circuit (can be change for your requirement);SMOKE SENSITIVITY: meet No.UL217 standards. Testing standard: 0.65~1.52%FT, have the misstatement detection.WORK ENVIRONMENT: -5~50°C;10~95%, no condensation.BUZZER VOLUME INTENSITY: 85 decibels of 10 feet.

INSTALLATION AND APPLICATIONS:

     Attached please find one copy of instruction, one smoke alarm SS-668, one bracket and two fixing screws.

      Setting choices, the jumper which has been reinstalled will work after restart the power.

                              As shown in the figure, when the short circuit jumper of J2 in the position of 1 and 2, the output of alarm statement is short circuit; when in the position of 2 and 3, the output of alarm statement is open. When the short  circuit jumper of J3 in the position of 1 and 2, it will automatic reset, when in the position of 2 and 3, it will be off-electric reset.

     Choose the appropriate installation area, fix the bracket with screw, and  connect the smoke sensor according the line color, then spin it on the bracket.

     Inside the room every 25~40 square meter, 0.5~2.5 meters above the important equipment installed one temperature alarm.

     Install screw hole spacing 45 mm